VMS - Vantage Modelling Solutions

VMS.AX10

CA Glue Filler 12 gr for 25 ml (in 50 ml dropper bottle)
 

Mixed with this fine powder CA glue turns into fast curing putty you can use for instant gap filling much like the standard putty but without the usual wait. Whenever you run out of putty or standard type is too slow you can mix fast curing putty using your CA glue and this filler powder. CA putty dries to solid filling that is easily sanded down. You can also apply this filling in layers and make combined fillings with other putties if necessary. Recommended to mix with VMS Flexy SLOW CA Glue for greater open time. Handy 50 ml dropper bottle with fine tip ensures easy application of powder to the mix and will last you very long!

Use: Dispense a portion of CA glue on a piece of styrene, glass or a metal sheet, never on cardboard as it will absorb your glue. Spray some powder onto the glue and mix it with a toothpick till you reach the consistency of putty. Quickly apply the putty and even it with a hobby knife to minimise the residue around the gap. Once the filling is dry sand it with 600 grade paper and follow with 1000 grade. 

Combine with: CA Glue

Recommended techniques: mix using a toothpick, apply with a blade

How to use the product?

​Dispense a portion of CA glue on a piece of styrene, glass or a metal sheet, never on cardboard as it will absorb your glue. Spray some powder onto the glue and mix it with a toothpick till you reach the consistency of putty. Quickly apply the putty and even it with a hobby knife to minimise the residue around the gap. Once the filling is dry sand it with 600 grade paper and follow with 1000 grade. 

How long till the mixture becomes useless?

Mixed putty will be good for a minute or two depending on how much powder you introduce. Please note too little powder mill result in putty that exhibits shrinkage too much powder will make the putty harden before you can apply it. We advise you use the powder and glue in 1:1 ratio. If shrinkage is the case simply apply additional layer of putty. 

Which glue is best suited to use with the powder?

We recommend VMS Flexy SLOW - it will give you some extra open time, but the powder can be used with any CA glue. 

My filler bottle contents seem low?

All bottles are filled at around 2/3 of their capacity for a technical reason - the filling machine can't fill the powder to the brim as the powder gets aerated during filling which momentarily increases the volume, we continued to fill a bottle the powder would overflow which would interfere with production flow. The powder itself settles down when the bottle is left alone for several days and the volume decreases. This phenomenon is related to the difference between bulk volume and actual volume. A bottle contents is 12-13 gr which is enough to fill around hundred gaps. 

Prijsinformatie:
Prijs per stuk:
€ 8,90
Aantal: Bestellen

Voorraad

Reviews

Sorteren op:

Review toevoegen

Geen reviews gevonden.

Aanmelden nieuwsbrief

Meld u hier aan voor de nieuwsbrief




Aanmelden

ROBI Modelbouw

Adres: Schoolstraat 15A   Openingstijden winkel
  4841 XC   PRINSENBEEK   Maandag gesloten
  Nederland   Dinsdag gesloten
      Woensdag 10:00u - 17:30u
Telefoon +31 (0)6 123 998 44   Donderdag 10:00u - 17:30u
E-mail info@robimodelbouw.nl   Vrijdag 10:00u - 17:30u
      Zaterdag 10:00u - 17:00u
      Zondag gesloten

 

Deze website gebruikt cookies om het bezoek te meten, we slaan geen persoonlijke gegevens op.
Accepteer geselecteerde cookies